STC-3018 12V / 24V / 220V Digital Temperature Controller C/F Thermostat Relay 10A Heating/Cooling Thermoregulator with Dual LED Display
106
Direct purchase from the factory 
Idaniloju sisan
Ẹbun ọfẹ
Ilana gbigbe
Ilana padaẸbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471
Features:
1.Heating or cooling control.Red and blue dual led display
2.Control mode of return difference;Temperature display resolution 0.1
3.Multiple alarm mode selection;Switch between ° C and °F
4.Support temperature correction and support for power loss (the parameters of the sudden power failure are still valid
5.Application range is like home temperature control, farm, various cold storage, greenhouse, aquarium, etc
Specifications:
Display Type:Digital
Temperature sensor: NTC 10K
Senor length:1.0m
Temperature measuring range: -55 ° C ~ 120 ° C / -66°F~248°F
Resolution: 0.1 ° C
Accuracy:±1° C
Power supply: 110-220VAC 50/60Hz, 12V DC , 24V DC(Please choose power supply when ordering)
Power consumption: <3W
Storage temperature: -30 ° C ~ 75 ° C
Relative humidity: 20% ~ 85% (No condensate)
Relay contact capacity: 10A/240VAC; Heat 10A/240VA
Instruction:
Normal mode: The red digital tube on the left shows the real-time temperature, the blue digital tube on the right shows the set temperature.
Setting mode: The red digital tube on the left displays the setting mode, the blue digital tube on the right displays the setting contents.
How to set the start or stop temperature:
Press the "SET"button onace and the screen flashed,Press the "up" and "Down" button to set the temperature.
Long press "SET"button for 5 seconds to enter set Mode:
Package Included:Code | Function | Set Range | Default |
| Start or Stop Temperature | -55~120°C/-67~248°F | 0°C/68°F |
P0 | Working mode | H | H/C |
P1 | Return Difference set value | 0.2-30°C | 2°C |
P2 | High temperature alarm value | -55~120°C/-67~248°F | 120°C/248°F |
P3 | Low temperature alarm value | -55~120°C/-67~248°F | -55°C/-67°F |
P4 | Temperature calibration value | -10.0°C~10.0°C | 0 |
P5 | Compressor delay time | 0-60Min | 0 |
P6 | Display mode | C/F | C |
1 x Temperature Controller
1 x Waterproof Sensor
